Gas Flow Meter

 

ft2a3Fox Model FT2A

The Fox Model FT2A, winner of both the 2014 Flow Control Innovation Award and the Processing Breakthrough Product Award, is the most widely versatile Thermal Gas Mass Flow Meter on the market today.

The Model FT2A has a large selection of communication protocol options available intrinsically (without any other equipment). Options include: BACnet MS/TP, RS485 Modbus RTU, Profibus-DP, DeviceNet, or Ethernet Modbus TCP.

The Model FT2A measures gas flow rate in standard units (SCFM, NM³/hr, LBS/HR, KG/HR & many more) without the need for temperature and pressure compensation. See the Features/Benefits section below to explore all that the FT2A can offer your application.

 

Features/Benefits

Common Features for Fox Model FT2A Flow Meter:

  • Measures process gas flow rate/total and temperature
  • Standard USB port, optional BACnet MS/TP, RS485 Modbus, Profibus-DP, DeviceNet, or Ethernet Modbus TCP
  • Standard on-board display and configuration panel
  • Equipped with the Power Pro™ thermal mass flow sensor
  • One discrete output is programmable for either pulse (for totalizing flow) or alarms

  • One discrete input to reset total or select a different calibration on 2 gas curves
  • 4 to 20 mA output proportional to mass flow rate
  • FM and FMc approved for Class I, II, III, Div 2, Groups A, B, C, D, E, F, G, T4 hazardous locations; NEMA 4X approved; Remote NEMA 4X electronics enclosure with explosion proof sensor j-box.
  • CE Approved
  • NIST traceable calibration
  • Wide measurement range
  • 1% R + 0.2% FS flow accuracy
  • 24 VDC or optional 100 to 240VAC in local or remote enclosures

ft3dFox Model FT3

The Fox Model FT3, a multiple award-winning thermal gas mass flow meter manufactured in the United States by Fox Thermal Instruments.

The Model FT3 was designed with our oil and gas customers in mind. This meter is Quad O (OOOO) compliant and is perfect for use in flare gas applications along with other fuel gas measurement.

The Model FT3 measures gas flow rate in standard units (SCFM, NM³/hr, LBS/HR, KG/HR & many more) without the need for temperature and pressure compensation.

Features/Benefits

Common Features for Fox Model FT3 Flow Meter:

  • Measures process gas flow rate/total and temperature
  • A USB connection is standard (free FT3 View™ Software); Optional HART and RS485 Modbus communication protocols
  • Optional on-board display and configuration panel
  • Equipped with the Power Pro™ thermal mass flow sensor
  • One discrete output is programmable for either pulse (for totalizing flows) or alarms
  • One discrete input to reset total or select a different calibration on 2 gas curves
  • 4 to 20 mA output proportional to mass flow rate
  • Click the Approvals tab for Model FT3 Agency Approvals.
  • Calibration Validation with the CAL-V™ and Zero CAL-CHECK® features.
  • NIST-traceable calibration
  • Wide measurement range
  • 1% R + 0.2% FS flow accuracy
  • 24 VDC or optional 100 to 240VAC in local or remote enclosures